home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Fritz: All Fritz
/
All Fritz.zip
/
All Fritz
/
FILES
/
UTILFILE
/
PCBROWS2.LZH
/
BR3.DOC
< prev
next >
Wrap
Text File
|
1989-09-29
|
76KB
|
1,698 lines
Reference Section
In this section, you will learn how to:
Get Help Do a Normal Search
Load PC-Browse Do a Keyword Search
Exit PC-Browse Run other programs
Pop-up PC-Browse Bring up additional windows
Load a File Use the location list
Move around Paste and print
You don't have to read this section of the manual in any particular
order. Each subsection is self-contained, containing detailed
information about a specific topic.
Getting Help
To View the PC-Browse Help Screens:
1. Press F1 when the main PC-Browse menu is displayed. You'll see brief
descriptions of the function keys, shifted function keys, cursor
control keys, and navigation keys.
2. Use the normal PC-Browse viewing keys to browse the Help file:
Scrolling PgUp, PgDn, and their Shf and Ctl versions
Select Topic Arrows, Tab, Shf Tab
Jump to Topic Enter or Grey+
Searching F9, Grey+
Begin/End F10 or Shf Grey+, Shf F10 or Shf Grey-
Location list F4, Shf F4, F5, Shf F9
3. Press the Esc or F1 key to leave the Help screens. You'll return to
where you left off in the PC-Browse window.
Remarks
The help screens are simply the PC-Browse file BR.HLP, with links to
the on-line tutorial file BTUT.BRS and reference file BREF.BRS. You can
edit these files if you like.
Viewing the Main Menu
There are two sets of main menus, one with descriptive terms for common
functions, the other with abbreviated terms for all functions.
- 45 -
The simpler main menus are the default:
* The simplified Main Menu is visible when you have a file loaded:
Esc:Exit F1:Help F4:Backtrack F6:File F7:Paste F9:Find F10:First-page
* The simplified Shift Main Menu is visible if you hold down either
shift key:
Esc:Unload F4:View-locations F7:Print PgUp/Dn:more
The abbreviated main menus are turned on with the /A switch (see:
Customizing):
* The abbreviated Main Menu is visible whenever you have a file
loaded (Esc:Ext, not shown, is at the left):
F1:Hlp F2:Opn F3:Op+ F4:Lc- F5:Lc+ F6:Fil F7:Pst F8:Dir F9:Fnd F10:Top
* The abbreviated Shift Main Menu is visible if you hold down either
shift key (Esc:UnL, not shown, is at the left):
F2:Op- F4:Lst F6:PTo F7:Prt F9:Lc* F10:Bot
Function keys aren't used with Ctl or Alt. Here's a preview of function
key operations:
Key Normal Operation Key Shift Operation
-------------------------------- ---------------------------------
Esc Ext Exit to application F1 UnL Unload from memory
F1 Hlp Browse help file F1
F2 Opn Open new window F2 Op- Shut current window
F3 Op+ Re-open a window F3
F4 Lc- To prior location F4 Lst Show location list
F5 Lc+ Re-visit location F5
F6 Fil Enter File name F6 PTo Enter file to print to
F7 Pst Paste text F7 Prt Print text
F8 Dir Enter directory name F8
F9 Fnd Enter Find text F9 Lc* Set protected location
F10 Top Jump to first page F10 Bot Jump to last page
RUNNING PC-BROWSE
Running PC-Browse is a two-step process. First, you load the PC-Browse
program into your computer's memory. You usually do this only once, at
the start of a day's work session. Then, to call PC-Browse into action,
you pop it up by pressing its "hot key."
- 46 -
PC-Browse is a pop-up program, also called a TSR (for "Terminate and
Stay Resident," a program that stays in memory). Pop-up programs are
different from most other programs. To use your word processor, say,
you must exit the program you're currently using first. A pop-up
program, on the other hand, is always loaded and ready. Even if you're
working with your word processor or spreadsheet, you can use PC-Browse
without exiting simply by "waking it up" with its hot key. When you're
done PC-Browsing, you return to your spreadsheet or word processor
exactly where you left off.
The only catch is you must load PC-Browse at the start of your work
session (or, at any rate, before your word processor or spreadsheet).
"Loading" a pop-up program simply means copying it from disk into
memory, and running the initial startup portion. You can also unload
PC-Browse from memory, to get more memory for a large program.
You can use one of three methods to load PC-Browse into memory:
1. Load PC-Browse without a file. When you pop it up from DOS or
another program, you load the file you want to browse.
2. Load PC-Browse along with the file you want to display. Then you can
view this file automatically whenever you pop up PC-Browse.
3. Include either method in your AUTOEXEC.BAT file to automatically
load PC-Browse each time you start your computer.
To load PC-Browse only:
* At the DOS prompt, type:
BR <Enter>
The PC-Browse front screen will appear. It contains information about
the product. The DOS prompt is redisplayed below the message. To load
PC-Browse from another disk or directory, include the drive
specification and path before the BR command.
Now you can run a word processor, database, etc. PC-Browse waits in the
background until you press the hot key to pop it up; the unique
combination of keys that tells PC-Browse to become active.
To load PC-Browse along with an initial file:
* At the DOS prompt, type:
BR drive:\path\filename <Enter>
- 47 -
where drive, path, and filename define the file to be loaded into
PC-Browse. For example, to load PC-Browse with an initial file named
file.one, type:
BR FILE.ONE <Enter>
You'll need to specify the drive and/or path if the file you want to
use is not in the current directory, or a PATH= or PCBROWSE=
directory (see: Loading a File into PC-Browse), such as:
BR D:\BR2\FILE.TWO <Enter>
To load PC-Browse whenever you start your computer:
1. Using PC-Write (or an ASCII text editor), modify your AUTOEXEC.BAT
file. This file, in the root directory of your hard disk or boot
diskette, is run every time you start your computer. If you don't
have one, use PC-Write or your text editor to create one.
2. Add one of the following lines to the file:
drive:\path\BR (To load without a file)
drive:\path\BR drive:\path\filename (To load with a file)
where BR loads PC-Browse into memory and "drive:\path\filename"
defines the file to be loaded. The "drive" and "path" in front of BR
are important, since the current directory when AUTOEXEC.BAT runs is
the root directory. For example, if PC-Browse is in the directory
PCBR on your C drive, and you want to load an initial file from your
PCW directory, the AUTOEXEC.BAT line might be:
C:\PCBR\BR C:\PCW\MYFILE.DOC
Remarks
There are various customizing switches you can use when you load (see:
Customizing). Two are common. The first, /C, turns on color if you have
a color monitor. The second, /E, tells PC-Browse to load most of itself
into expanded memory (also call EMS or LIM memory). If your computer
has this kind of memory, and all your applications use it in the
standard way (like PC-Browse), then PC-Browse uses only 3K (instead of
60K) of normal memory. These switches go after the BR command, usually
last on the line. For example:
BR AREACODE /C /E
To unload PC-Browse from memory:
1. If PC-Browse is not active, pop it up with Shf Ctl F1 (or any
PC-Browse hot key).
- 48 -
2. Press Shf Esc; then press F9 to confirm. PC-Browse removes itself
from memory.
PC-Browse may not be able to free itself from memory. In some cases, it
must stay to maintain an internal structure called the "Interrupt
Chain." This happens if you load additional pop-up programs after you
load PC-Browse (these programs must "chain" through PC-Browse to get
keyboard "interrupts"). If you load PC-Browse after all other resident
programs, you can free it with Shf Esc.
Exiting PC-Browse
When you "exit" from PC-Browse, it becomes inactive, but stays in
memory until you need it again. To remove PC-Browse from memory, you
need to "unload" it (above).
To exit PC-Browse temporarily:
* Press Esc.
* Or, press Shf F2 if you have only one PC-Browse window open.
The PC-Browse window disappears from your screen as it becomes
inactive; you return to the original program you were running when
you popped up PC-Browse. It is still in memory, waiting in the
background until you need it again. The Shf F2 key closes the
current window, so if there's only one window, PC-Browse exits in
the same way.
Popping Up PC-Browse
The hot key is the key (or combination of keys) that pops up PC-Browse,
making it the active program on your screen. There are six hot keys,
but all except the first are shortcut keys to do various PC-Browse
operations immediately after it pops up. The hot key combinations are
written in the form "Shf Ctl F1." This means that you must hold down
the shift and the control keys and then press the F1 key.
You can change the hot key combinations. If one of your programs uses
Shf Ctl F1, or you have a computer that does not recognize Shf Ctl
combinations, you could tell PC-Browse to pop up with a hot key like
Alt Ctl F1 or Ctl B. (see: Customizing.)
To pop up PC-Browse:
* Press Shf Ctl F1.
- 49 -
Shf Ctl F1 is the "basic" hot key. If you had already loaded a file
into PC-Browse, the page you last viewed is in the PC-Browse window
and the full Main Menu appears. All windows, files, and other items
are the same as when you left. If you pop up PC-Browse without an
active file, the screen looks like this:
+File:-----------------------------Find:cursorword--------------------+
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+Esc:Exit F1:Help F6:File F9:Find----------------------------------+
When you pop up PC-Browse, the word at the cursor in the underlying
application becomes the Find text. Say you're writing a letter to Ms.
Sanchez and your address file is loaded in PC-Browse. To find her
address, put the cursor on her name, pop up PC-Browse with Shf Ctl F1,
and hit the search (Grey+) key.
The text at the cursor depends on the application. In a word processor,
it's the word just typed. In a spreadsheet, it's the current cell. In
DOS, it's usually the current drive or directory. If the cursor is just
after a word, that word becomes the Find text. If the cursor isn't on
or right after a word, the original Find text isn't changed when you
pop up. PC-Browse skips commas and some other punctuation when scanning
back to find the start of a word.
To start a Lookup search for the word at the cursor:
* Press Shf Ctl F2.
PC-Browse pops up and does a lookup search, the same as Shf Ctl F1
then F9 then F2. The word at the cursor becomes a lookup search-
trigger keyword.
To start a Linear search for the keyword at the cursor:
* Press Shf Ctl F3.
PC-Browse pops up and does a linear search, the same as Shf Ctl F1
then F9 then F3. The word at the cursor becomes a linear search-
trigger keyword.
- 50 -
To pop up PC-Browse and prepare to get a directory:
* Press Shf Ctl F8.
PC-Browse pops up with the cursor at the File prompt, the same as
Shf Ctl F1 then F8. Type the file name pattern you want.
To pop-up PC-Browse and move the cursor to the Find prompt:
* Press Shf Ctl F9
PC-Browse pops up with the page you last viewed, but with the cursor
at the Find prompt, the same as Shf Ctl F1 then F9. The word at the
cursor becomes the Find text. Press Grey+ to search for it, or F10
or Shf Grey+ to search from the start of the file.
To pop-up PC-Browse and view the first page of the current file:
* Press Shf Ctl F10.
PC-Browse pops up at the first page of the file, the same as Shf Ctl
F1 then F10. This is particularly useful with files that have an
index page at the start. Use the arrow keys to highlight a keyword,
then Grey+ or Enter to jump to the target keyword.
File Name Patterns
Several PC-Browse operations apply to a group of files, not just one
file. For these, you type a File Name Pattern at the "F6:File" prompt.
A file name pattern looks like this:
drive\path\filename
"drive" can be:
* A drive specification of one or more drive letters followed by a
colon. For example, to search drive C, type "C:". To search drives A
and C, type "AC:" (but you can't get a directory with multiple
drives, only search through them). To search the default drive, you
don't need a drive letter.
"path" can be:
* A specific directory path, such as "\PCW\" to search the PCW
subdirectory in the root directory, or "LETT\" to search the
subdirectory LETT in the current directory.
* path\*\ to also search all paths "downstream" from a given
directory. For example, "PCW\*\CAT" finds PCW\CAT, PCW\R1\CAT,
PCW\R2\D2\CAT, and so on.
* *\ to search all paths "downstream" from the current directory
(i.e., the current directory and any of its subdirectories).
* \*\ to search the whole disk (all paths on the drive from the root
directory).
- 51 -
You can also put "/s" after the file name to search all
subdirectories, as you can with many DOS commands. For example,
"\CAT/s" finds all files on the disk named CAT, and "PCW\KIT/s"
finds PCW\KIT, PCW\D3\KIT, and so on.
"filename" can be:
* A specific file name.
* *.* to search all files.
* A combination of DOS wild card characters and text to narrow the
search:
The ? wild card matches any one character.
The * wild card matches all characters that follow it.
The ?'s and *'s can only be used at the end of the file name or
extension; a pattern such as "?BC" will not work (see your DOS
manual for further details). For example, "*.BAT" finds all files
with the extension BAT, and "A??.*" finds any three-letter file name
starting with A and any extension.
Here are some examples of file name patterns:
CD:*.DOC
searches all files with the extension DOC on the current directories of
drives C and D.
CE:\PCW\*.*
searches all files in the PCW directories on both drives C and E. (You
wouldn't believe how hard it is to find files when you have several
hard disks. Or maybe you would....)
C:*\*.BAT
searches all .BAT files on the current directory and its subdirectories
on drive C.
\*\*.*
searches all files on the current drive.
Loading a File into PC-Browse
Unless you always use the BR filename command to use PC-Browse with one
file, you'll need to tell PC-Browse to load new files. A directory
option makes this easy to do.
- 52 -
To Load a File into PC-Browse:
* Press F6. PC-Browse prompts you to type a file name in the "File:"
area of the top line. When you're done, press Enter. PC-Browse
displays the first page of the file.
You can specify a drive (b:myfile.doc), a path (\br\myfile.doc), or
both (c:\pcw\myfile.doc). If you don't specify a drive or path
(myfile.doc), PC-Browse looks for your file in the current
directory, and then each directory specified by your PCBROWSE= or
PATH= environment variables.
PC-Browse shows (and remembers) the full name of your file on the top
line. If you exit, change directories, and then pop up PC-Browse again,
it uses this path to find the file. For example, if MYFILE.DOC is in
your PC-Write directory, the "File:" prompt shows:
+File:C:\PCW\MYFILE.DOC------------Find:------------------------------+
| |
You can enter a file name pattern at this prompt if you don't know the
exact file you want. Then you can either get a directory of all
matching file names, or all matching file names whose files also
contain the Find text. (This is covered in Searching Multiple Files.)
To Select a File from a Directory:
1. Press F6, type a file name pattern, then press F8 (not Enter).
2. Or, press F8, type a file name pattern, then press Enter (or F8).
A list of file names matching this pattern appears. The pattern must
be for a single drive only. The first one is highlighted. File name
patterns are described above.
3. Use the Arrow keys to select the file (or subdirectory) you want.
The name also appears in the "File:" prompt. There are two kinds of
file name lists:
* If your file name pattern includes directories, such as \*\ or
/s, the matching names are listed in one column. Use the Up and
Down Arrows to select the file you want.
* If your file name pattern assumes the current directory, such as
P?.DOC or *.*, the matching names and subdirectories are listed
in five columns. All four Arrow keys select a file name or
subdirectory. Subdirectory names end with "\". The parent
directory is also listed, as "..\".
- 53 -
4. Press Enter to load the selected file. If you select a directory
name ending in "\" instead, you get a list of its files in this
directory. Select "..\" to go back to the parent directory. Note
that PC-Browse does not actually change your current directory.
Remarks
Your path is set by the PATH command, which tells DOS and PC-Browse
where to look for files if they are not in the current directory. The
path lets programs find your files as you change directories on your
hard disk. The PATH command puts the various paths into the PATH=
environment string. There is also a PC-Browse "path" environment
string, PCBROWSE=. The PCBROWSE= environment string is searched first.
Put PC-Browse text files into a separate directory (one not in your
PATH) to keep DOS searches fast. The PCBROWSE= and PATH= strings can
have multiple paths, separated by semicolons.
If PC-Browse can't find a file in your current directory or along your
path, it beeps and displays "Can't find filename", where "filename" is
the file you asked for.
Files You Can Load With PC-Browse
Text Files:
PC-Browse works easily with "straight-ASCII" text files. These files
contain only "printable" characters; they have no formatting or
"control" codes. These files include:
* PC-Write files without format commands (or with them; see below).
* Output files from a database or spreadsheet "print to file" option.
* Word processor files saved in "non-document" mode.
* Batch (.BAT) files or program source files (.C, .PAS, or .ASM).
* Text files downloaded from bulletin boards.
In normal text files, each line ends with a carriage return and line
feed (code 13 then 10). PC-Browse assumes the line feed (code 10) ends
a line. Carriage return (code 13) doesn't force the end of a line; it
is ignored before a line feed, and assumed to be a PC-Write X font any
other place. For extremely large files with very short lines, you can
save some room by leaving out the carriage returns. This applies to
some PC-Browse applications using the lookup search. But for most text
files, and any file created with PC-Write, each line should end with
the normal carriage return and line feed pair. Tabs (code 9) are also
accepted, and shown assuming Tabs are set every 4 columns.
Word Processing Files:
Most word processing files include formatting codes for margins, fonts,
and so forth. PC-Browse knows how to read these codes in PC-Write
files; it displays them as easily as it does text files. PC-Write font
- 54 -
characters (all codes below 32) and guidelines (all lines starting with
code 11) are "hidden", as they would be in PC-Write's Hide mode.
PC-Write page break lines (code 12, or the pair 12 then 15) are hidden,
but actual text on a line after a form feed is visible (including
PC-Write page numbers).
Many other word processors store formatting information in the first
few hundred bytes of their files. You never see it when you're working
in the word processor, but it's there. The rest of the file is
relatively "clean", so just use Shf PgDn to skip the first screen.
In some word processors, every paragraph is stored as one very long
line. You can use the Shf Left and Right Arrow, Home, and End keys to
view the long "lines" in these files.
A few word processors store your text in a completely non-ASCII,
proprietary format. You may have difficulty reading such files with
PC-Browse.
Other File Types:
Other files, such as programs (.EXE, .COM) or spreadsheet files (.WK1)
can also be displayed in PC-Browse, but, since they are not ASCII
files, you will probably have trouble recognizing more than small
fragments of them. You may find the text of any messages they display.
Some database files (dBase, PC-File) are partially readable.
You can't read encrypted files (so much for peeking at the passwords)
or files compressed with archiving programs. PC-Browse won't show
understandable text. There's nothing wrong with your file, or with
PC-Browse; the contents just aren't in standard text format. Since
PC-Browse never writes to the file, you can always PC-Browse a file
without harm.
Moving Around in PC-Browse
Information in a PC-Browse file is divided into pages. Pages are always
separated by a form feed (a PC-Write page break). The form feed symbol
is character code 12 and looks like a plus sign with the letter "o" on
top of it. In PC-Browse, as with a printed report, each page of text is
separate. In order to display material as clearly as possible, PC-
Browse shows only one page at a time. You won't see the bottom of one
page and the top of another (as you would with PC-Write.)
To scroll one line at a time within a page:
* Press PgDn to scroll forward (toward the end of the file).
* Press PgUp to scroll backward (toward the top of the file).
- 55 -
PgDn and PgUp allow you to scroll one line at a time within a page
of text. Scrolling stops when you reach the top or the bottom of the
page.
To move in larger jumps (even across pages), use Shf PgDn or Shf PgUp.
To scroll one window at a time:
* Press Shf PgDn to scroll down one window.
* Press Shf PgUp to scroll up one window.
Shf PgDn and Shf PgUp scroll one window's worth at a time, until you
reach the top or bottom of the page. Shf PgDn at the bottom of a
page goes to the top of the next page. Likewise, Shf PgUp at the top
of a page jumps to the bottom of the preceding page. Shf PgDn at the
end of the last page or Shf PgUp at the top of the first page just
beep.
You will notice the graphical reminder, near the bottom of the right
edge of the window (marked by the # in the figure below). If you can
page down, you see a downward pointing triangle. If you can page
up, the triangle will point upwards. If you can page in either
direction, the triangles join to become a diamond.
| #
+Esc:Unload F4:View-locations F7:Print ----------PgUp/Dn:more+
Finally, if the entire file fits in the window and has no page
breaks, you can't scroll in either direction, and no PgUp/Dn marker
appears on this line.
To move directly from page to page, use the Ctl PgUp and Ctl PgDn keys.
To scroll one page at a time:
* Press Ctl PgDn to move to the next page.
* Press Ctl PgUp to move to the prior page.
Ctl PgDn takes you to the top of the next page (except on the last
page of the file). In the middle of a page, Ctl PgUp moves to the
top of that page. If you press it again, it moves to the top of the
preceding page, and so on until you reach the top of the file.
People are particular about PgUp and PgDn. About 30% feel they move in
the wrong direction. Another group feels PgUp/Dn and Shf PgUp/Dn should
be swapped. You can alter these keys to suit yourself with the /A:
switch (see: Customizing).
- 56 -
To move to the top or bottom of the file:
* Press F10 or Shf Grey+ to move to the top of the file.
* Press Shf F10 or Shf Grey- to move to the end of the file.
Grey+ and Grey- refer to the plus and minus keys on the numeric
keypad at the far right of the keyboard, not the keys across the top
of the keyboard. They're grey rather than white on most keyboards.
Not all keyboards have Grey+ and Grey- keys.
You may be looking at a file wider than 78 columns. You can scroll the
window left or right on the page to see the entire file through the
PC-Browse window.
To scroll the window left:
* Press Shf Left Arrow. The text on the page moves right, so you can
see 20 more columns on the left.
To scroll the window right:
* Press Shf Right Arrow. The text on the page moves left, so you can
see 20 more columns on the right.
To scroll left to the left margin:
* Press the Home key. The start of every line is visible.
To scroll one window right from the left margin:
* Press the End key. Columns 79 to 156 (one window width right) are
visible.
You can also move to the next or prior trigger keyword (a highlighted
word that links to the location of its target keyword). The selected
trigger keyword replaces the Find text. Any upper case letters in the
trigger keyword become lower case in the Find text, since lower case
matches both upper and lower case in a keyword search.
To scroll to next or prior trigger keyword:
* Press Tab to move to the next trigger keyword.
* Press Shf Tab to move to the prior trigger keyword.
* Press an Arrow key to select a trigger keyword if they're lined up
in rows and columns.
A trigger keyword is a word surrounded by special characters
(delimiters) that initiates a linear or lookup search. (Keyword
- 57 -
Search discusses triggers and delimiters.) If there are no (more)
trigger keywords in the file, PC-Browse beeps. If the file is long,
the bottom line of the window shows you it's searching for the
trigger.
Normal Search
In a normal search, PC-Browse scans the file for the next occurrence of
the find text.
To do a normal search:
1. Press F9. The cursor moves to the Find text area. You see the Find
menu:
MATCH F5:Any alpha F6:Non-alpha. SEARCH F10:From top Grey+:From cursor.
2. Type the text you want to search for.
The default Find text is the word at the cursor in the original
program when you pressed the hot key. (If there was no text at the
cursor, the Find text does not change). If this is the text you want
to search for, you don't need to press F9 or type it in again.
3. Press the Enter key to just accept the Find text without starting a
search.
4. Or press one of the search keys to start searching from the F9
prompt:
Grey+ (or Ctl-L) to search from the current location forward.
Grey- (or Ctl-O) to search from the current location backward.
Shf Grey+ (or F10) to go to the top of the file and search forward.
Shf Grey- (or Shf F10) to go to the very end and search backward.
To do a normal search on a word from another program:
1. From that program, place the cursor on the word you wish to search
for. The cursor can be on any character of the word. It can also be
on the space just after the word, so you can type the word and then
search for it with PC-Browse.
2. Press Shf Ctl F9. PC-Browse pops up and puts the word at the cursor
in the original program into the Find text. The cursor is in the
Find text.
3. Press one of the search keys described above.
Once PC-Browse finds the text, the search stops and the found text is
highlighted.
- 58 -
To search for further occurrences of the find text:
* Grey+ (or Ctl-L) searches forward.
* Grey- (or Ctl-O) searches backward.
* Enter searches forward (at the Find or File prompt, Enter just
accepts the text).
* Shf Grey+ (or F10) then Grey+ searches forward from the top.
* Shf Grey- (or Shf F10) then Grey- searches backward from the end.
While PC-Browse is searching, it displays the following message:
| |
+Finding... (xx%) [Press any key to stop search]----------------------+
where "xx" indicates how far the search has progressed through the
file. If you press a key while this message is displayed, the search
stops.
If PC-Browse finds the text, the window shows the page, with the found
text highlighted (if you found invisible text, like a font , the next
character is highlighted). The file locations both before and after you
made the jump are saved in the location list. Press F4 to return to the
previous location, or Shf F4 to view the list. (See: Location List.)
If PC-Browse does not find the text, it displays "Not found: text"
where "text" is the text you were searching for. The message is cleared
the next time you press a key.
Case Matching and Wild Cards in a Search
PC-Browse has case matching rules and wild card characters that help
you search for text. It uses the same case matching and wild cards as
PC-Write's Find function. These aren't the same as the file name wild
card characters * and ? used at the File: prompt.
During a search, lower case letters match the corresponding upper case
and accented letters. For example, "a" matches "a", "A", or any of the
foreign language A's in the upper ASCII set. To match only the lower
case "a", press F4 (a right facing triangle) before the "a". (Lookup
keyword searches are different; all cases match.)
Also, a single space matches any combination of spaces, font characters
(codes 1 to 31, except 12), line boundaries (code 13,10 pair), or PC-
Write Guide Lines (any line starting with code 11). Again, the F4 wild
card before a space makes it match exactly one space.
PC-Browse normally ignores PC-Write font characters in the file (codes
less than 32). For example, if your Find text is Gregor, PC-Browse
finds Gregor even if the "G" is boldfaced. However, if you put
explicit font characters in the Find text, they must occur in the file
- 59 -
to match (unless they are also wild cards, in which case you need the
F4 wild card in front of them).
Like a wild card, a trigger keyword delimiter modifies the search.
Either a linear or a lookup search-trigger keyword delimiter matches
the corresponding target keyword delimiter. A lookup trigger delimiter
also invokes a lookup search instead of a normal, linear search. Also
in a lookup search, all letter cases match.
You can use the following wild cards to find a text string with a
particular pattern:
Key Code Description
F4 16 Matches the next character exactly. In particular:
A space matches exactly.
A lower case letter matches exactly.
A trigger keyword delimiter matches exactly.
A character that represents a wild card matches exactly:
Alt-A (code 14), Alt-D (code 16), Alt-J (code 8),
Alt-M (code 7), Alt-X (code 13) and Alt-Z (code 15).
If you want to search for one of these PC-Write font
characters, you must precede it with F4 so that it does
not act like a wild card.
F5 07 Matches any letter or number found at that position, but
not spaces or symbols (i.e., matches "a" or "3" but not
"." or "$").
F6 08 Matches any space or symbol found at that position, but
not letters or numbers (i.e., matches "." or "$" but not
"A" or "3"). Use F6 to find whole words: "at" surrounded
by F6 characters won't find "cat" or "match".
F7 15 Matches any one character, blank, letter, number, or
symbol.
F8 13,10 Matches a line boundary, the characters at the end of a
line. Line boundaries contain a carriage return (code
13) and line feed (code 10). Code 13 by itself matches the
carriage return; code 14 by itself, a line feed.
Here are some examples (for this example, ! is used for the F4 wild
card, @ for F5, # for F6, and $ for F7):
Text Wild Card Matches Doesn't match
ax!$ F4 ax$ axe, ax*
Ho@se F5 House, Horse Hose, Ho-se
C#PO F6 C.PO, C+PO C3PO, CAPO
A$om F7 Atom, A:om Aom, A..om
- 60 -
Foreign and Special Characters in a Search
If the text you want to find contains foreign or special characters,
you can enter them from the keyboard using the Accent key. Each special
character is created typing the first of a pair of characters, then the
Accent key, then the second of the pair. The Accent key acts like a
special Left Arrow, overstriking the first character with the second.
PC-Browse supports both the normal IBM extended character set and the
alternate "Code Page 850" character set (if your computer hardware
supports its use).
To enter foreign or special characters with the Accent key:
* Type one of the characters below, then the Accent key, then the
second character.
Here's the table of the keystroke combination that create the accented
characters (since many printers cannot print them, we did not put the
accented characters themselves in this manual):
Code Keys Code Keys Code Keys Code Keys
128 C and , 141 i and ` 154 U and " 222 * 7 and `
129 u and " 142 A and " 155 c and / 224 * a and /
130 e and ' 143 A and o 157 = and Y 226 * g and /
131 a and ^ 144 E and ' 160 a and ' 227 * p and /
132 a and " 145 a and e 161 i and ' 228 * S and /
133 a and ` 146 A and E 162 o and ' 229 * s and /
134 o and a 147 o and ^ 163 u and ' 231 * t and /
135 c and , 148 o and " 164 n and ~ 232 * F and /
136 e and ^ 149 o and ` 165 N and ~ 233 * h and /
137 e and " 150 u and ^ 166 a and _ 234 M and /
138 e and ` 151 * u and ` 167 o and _ 235 * d and /
139 i and " 152 y and " 168 ? and ? 236 * $ and `
140 i and ^ 153 O and " 173 ! and ! 237 * f and /
If you have a VGA display and are using the code page 850 extended
character set, you lose the above characters marked with *; however you
gain the following:
Code Keys Code Keys Code Keys Code Keys
155 o and / 209 D and - 216 I and " 231 t and h
157 O and / 210 E and ^ 222 I and ` 232 T and H
181 A and ' 211 E and " 224 O and ' 233 U and '
182 A and ^ 212 E and ` 226 O and ^ 234 U and ^
183 A and` 213 i and . 227 O and ` 235 U and `
198 a and ~ 214 I and ' 228 o and ~ 236 y and '
199 A and ~ 215 I and ^ 229 O and ~ 237 Y and '
208 d and -
- 61 -
Remarks
PC-Browse also accepts PC-Write font characters, entered with the Alt
key and a letter.
You can also search for any character by entering its numeric code at
the Find prompt. Just hold down the Alt key as you enter the decimal
code using the numeric keypad. The character appears when you release
the Alt key.
Searching Multiple Files
PC-Browse allows you to search for the Find text in multiple files on
your disk. Basically, you use the DOS wild card characters you're
already familiar with, ? and *. You can view each file containing the
Find text, or put a list of such files onto the location list.
To search multiple files:
1. If the text you want to search for is not already in the Find
prompt, press the F9 key, type the search text, and press Enter.
Don't start the search by pressing Grey+ yet.
2. Press F6, or F8. PC-Browse prompts you to enter a file name. Press
F8 if you know you want a list of files, not a view of each one.
3. Type the file name pattern using a combination of text and file name
wild cards.
4. Press the Enter key to accept the file name, or Grey+ to accept it
and then search.
5. When the search first starts, you get the following prompt (unless
you pressed F8; then PC-Browse knows you want a list of files):
| |
+Esc:Cancel F9:View each match as found F10:Collect matches and list--+
* Press F9 to load each file containing the Find text.
When a match is found, PC-Browse displays the file, highlighting
the found text. You can move around through this file freely with
PgDn, Shf PgDn, and so on. If this is not the occurrence of the
Find text that you're looking for, press Grey+ or Enter to keep
searching. The search will continue through the end of the
current file and then on to the next file that matches the file
name pattern.
You can also press Shf Enter to go right to the next file and
search. Press Shf Enter as soon as you know the current file is
- 62 -
not the one you want. You can also press Grey- to search
backwards in the file; however, it won't go back to a prior file.
* Press F10 to put all files containing the Find text on the
location list.
This process may take a while. It adds to the location list,
described below. When it finishes, the location list is
displayed. Use the arrow keys to select a file to load. Since the
location list has a limited size, all locations may not fit. This
means you only get the end of the list. However, you can press
the Shf F9 key first to set a protected location, and then cancel
the search when the list fills. Then you get the first part of
the list. You can also make the location list bigger (see:
Customizing).
As each file matching the pattern is searched, its name is displayed in
the File prompt, along with the original file name pattern. For
example, if the pattern is:
CE:\PCW\*.*
the File prompt might display:
+File:CE:\PCW\*.*=C:\PCW\MYFILE.DOC---Find:browse---------------------+
| |
While PC-Browse is searching, it displays the following message:
| |
+Finding... (xx%) [Press any key to stop search]----------------------+
where "xx" indicates how far the search has progressed through the file
being searched (the counter starts over with each file). If you press
any key while PC-Browse is searching, the search stops (the key's
normal action does not occur).
If you change the Find text after a multi-file search and search again,
PC-Browse asks if you want to continue the multi-file search, or just
search the current file:
| |
+Esc:Cancel F9:This file only F10:All files matching file spec------+
Press F9 to just search the current file, or F10 to continue the multi-
file search but look with the different Find text.
If PC-Browse can't find any file that matches the file name pattern, it
shows the message: "Can't find filename pattern" where "filename
- 63 -
pattern" is what you entered at the File prompt. (The message clears
the next time you press a key to do something.)
If no (more) occurrences of the Find text can be found in any file that
matches the file name pattern, PC-Browse displays "Not found text"
where "text" is the text you were searching for. PC-Browse shows the
last file (if any) that contained "text."
Remarks
PC-Browse, by default, skips certain non-text files in a multiple file
search. Files with extensions .COM, .EXE, .OBJ, .OVL, and .OVR are
skipped unless you specifically tell PC-Browse to search them (e.g., by
setting the File text to *.EXE). In addition, hidden files are skipped,
but again if you know the name of a hidden file you can search it by
giving the name at the File prompt. Also, you can customize the list of
excluded file name extensions, to skip large non-text files like
compressed files or fonts (see: Customizing).
Keyword Searches
There are two kinds of keyword searches; a linear keyword search and a
lookup keyword search. This section describes keyword searches in
general, and linear and lookup searches in particular.
A linear keyword search is a kind of normal search. The Find text has
linear search-trigger keyword delimiters, which match the same text
with target keyword delimiters. In a normal search, "paint" finds
"paint" (or "Paint", "PAINT", etc). In a linear keyword search
"<paint>" finds "^paint*" (or "^Paint*", etc.), assuming < > and ^ *
are the defined linear-search trigger and target keyword delimiters.
A lookup keyword search appears on the surface like a linear keyword
search. However, it does not scan the whole file like a normal search
or a linear keyword search; instead it uses a much faster method
(divide and conquer) since the file is sorted by the keyword. The
lookup search is an extremely fast search of sorted data, most useful
with large files created from a data base program. There are four
requirements for a lookup search:
1. Each target keyword can appear only once in the file.
2. Each page must have one and only one target keyword.
3. Each page is limited to no more than 4096 bytes (or current buffer
size).
4. The lookup targets must occur in alphanumeric sort order, so a page
with "Beckett" comes before the one with "Brecht," which comes
before the one with "Shakespeare."
PC-Browse does a "divide and conquer" to do a lookup search. First it
compares the target keyword on the current page to the one it's
seeking. If it's looking for "Marimba" and finds "Glockenspiel," it
knows the target keyword must occur later in the file. But if it finds
- 64 -
"Sousaphone," it knows "Marimba" lies in the first part of the file. It
repeats this strategy with the selected portion of the file, choosing a
page in the middle and comparing keywords again. This continues until
it hits the target. Should there be two occurrences of the target text,
there is no guarantee which one it will find.
Note that both lookup and linear searches find the same target keyword;
they simply use different methods. The lookup search is much faster on
large files (perhaps 20 times faster on a 2-megabyte file), but lookup
files have more exacting design requirements.
To describe a keyword search, we use the idea of a trigger keyword and
a target keyword. The trigger keyword is the word that can start a
search; the target keyword is the word found by such a search. A
keyword search only finds words delimited (specially marked) as search
targets. Keyword searching requires files designed for PC-Browse. If
you just want to find a text string within a normal file, use the
normal search, described above.
There are three ways to trigger a keyword search:
1. Convert normal PC-Browse Find text to a trigger keyword, and then
search.
2. Pop up PC-Browse and do a keyword search for the word at the
application cursor.
3. Start a search from a trigger embedded in the text. This method
allows you to link (cross reference) related information. This
capability is often referred to as hypertext.
To do a keyword search on a word you type in:
1. Press F9 to put the cursor at the Find prompt. Type the text you
want to search for.
2. Press F3 to convert the Find text to a linear trigger keyword and
begin the search. PC-Browse places the linear search-trigger
delimiters around the Find text and forces the text to lower case.
It then searches the file (from the top, not simply from the current
location) for the first occurrence of the Find text as a target
keyword.
3. Or, press F2 to convert the Find text to a lookup trigger and begin
the search. PC-Browse places the lookup search-trigger delimiters
around the Find text and does a faster lookup search. There should
only be one occurrence of the lookup target text.
Let's assume your linear search-trigger keyword delimiters are "{" and
"}", your target keyword delimiters are "<" and ">", and you typed "hi"
at the Find prompt. If you simply press Grey+, PC-Browse does a normal
search, finding "hi", "this" and "<hi>". However, if you press F3
- 65 -
instead, it converts the Find text to "{hi}" and finds only "<hi>". The
braces in the Find text "{hi}" tell it to look in the file for "<hi>";
the trigger delimiters match the target delimiters. Now if you press
Grey+, you get a linear keyword search, because the find text "{hi}" is
still active.
While PC-Browse is doing a linear search, it displays the following
message:
| |
+Finding... (xx%) [Press any key to stop search]----------------------+
where "xx" indicates how far the search has progressed. If you press a
key while this message is displayed, the search stops (the key's action
is ignored).
If PC-Browse finds the target, the search stops and the found text is
highlighted. If not, it displays "Not found {text}" where "text" is
the target you were searching for and "{" and "}" are the search-
trigger delimiters. (The message clears when you press a key.)
For a lookup search, if the targets are not sorted in the file,
PC-Browse may (or may not) discover this and display: "Pages must be
sorted for a Lookup search to work". PC-Browse displays the page with
the target keyword that caused it to give this message. However, often
it won't detect that the file is not sorted, since this faster search
does not read the whole file. It simply tells you it can't find your
text. Also, each page must fit into the PC-Browse text buffer. If it
finds a page larger than the buffer (4096 bytes by default) with no
target keyword, it displays the message "Pages in this file are too
long".
To continue searching for the same target keyword:
* Press the Grey+ or Enter key. The target keyword for a linear search
may occur more than once. Grey+ or Enter finds the next one. (Grey-
finds prior ones.) The braces are still in the Find text, so each
repeated search is still a linear keyword search. If you press F9
then F3, you also get a linear keyword search, but from the top of
the file.
For example, in the file AREACODE, each state abbreviation is a target
keyword. Since some states have several area codes, some target
keywords occur several times. If you type CA as the Find text and then
press F3, PC-Browse finds the first page, 209/Fresno. If you press
Grey+, it finds the next one, 213/Carson.
If you press Grey+ after doing a lookup search, it does the lookup
search again. Since each target appears only once, it finds the same
page. This is one way to get back to a target page after you've found
- 66 -
it (via lookup search) and then browsed around the file. You might also
change files and press Grey+ to repeat the lookup search in the new
file.
To do a keyword search on a word from another program:
1. From that program, place the cursor on the word you wish to search
for. The cursor can be on any character of the word. It can also be
on the space just following the word, so you can type the word and
then search with PC-Browse.
2. Press Shf Ctl F3 to do a linear keyword search. PC-Browse pops up,
grabs the word at the cursor in the original program, makes it lower
case, adds the delimiters to create the linear search-trigger
keyword in the Find text, and searches for the first occurrence in
the PC-Browse file of that word as a target keyword.
3. Or, press Shf Ctl F2 to do a lookup search. A similar process
occurs, using lookup search-trigger delimiters.
If the PC-Browse file has no appropriate keyword definitions, it
pops up, but gives you a message and leaves the cursor at the Find
text prompt.
For example, load the sample file MISUSED into PC-Browse. Press Esc to
return to your original application (or the DOS prompt). Type the word
"its" and then press Shf Ctl F3. PC-Browse pops up and jumps to the
page covering the proper use of "its" and "it's."
To do a keyword search on a cross-referenced word:
1. Use Tab (or Shf Tab) to select the next (or previous) trigger
keyword. If the trigger keywords are aligned in rows and columns,
you can also use the four Arrow keys. When you select a trigger
keyword, it appears as new the Find text, in lower case. These keys
stop at both linear and lookup search-trigger keywords.
2. Press the Grey+ or Enter key to search for the target keyword. This
searches from the start of the file for the first occurrence of the
text as a target keyword.
For example, load the sample file HAMLET into PC-Browse. Each time you
press Tab, the next trigger is highlighted. The Find text shows the
trigger you just found. If you tab to the "outrageous fortune" trigger
(the fourth trigger in the file) and press Grey+, you jump to the page
with "<OUTRAGEOUS FORTUNE>" at the top as the target keyword.
If the triggers are lined up in contiguous rows and columns (called an
index page), the four Arrow keys also select a trigger keyword. For
example, in the sample file MISUSED the first page is an index page.
- 67 -
You can use the Arrow keys to highlight a trigger keyword, and then
Enter or Grey+ to jump to the corresponding target page.
You may want to search for a particular trigger keyword itself. For
example, you want to find all cross-references to a given target
keyword.
To search for references to a keyword:
1. Place the trigger keyword in the Find text. You can type the keyword
at the F9 prompt and press F3, use the Tab key to select it, or type
the keyword and delimiters yourself.
2. Press F9 to go to the Find text.
3. Press Ins, then F4. This inserts the F4 wild card in front of the
first search trigger keyword delimiter, to make it match exactly.
4. Press End, then Bksp. This removes the final search-trigger keyword
delimiter.
5. Press Grey+ to search. Because of the F4 wild card, you get a normal
search.
Remarks
Most of our sample files use PC-Write font characters as trigger
delimiters. In MISUSED, for example, the index on the first page
doesn't show the trigger delimiters, because PC-Write font characters
are hidden in PC-Browse. This makes the table easier to read. Fonts do
appear in the Find text when you use Tab or Arrow keys to highlight a
trigger.
Links Between Files
You can put a file name in square brackets after a trigger keyword to
link to the target keyword in that file. This can be handy to organize
your application files. An earlier example used PARTS and SUPPLIER
files to keep different information in different files. Very large
applications can be easier to manage if divided into separate files.
The left square bracket must come either right after the trigger
keyword, or with one space between. If you want the file name in
brackets hidden in PC-Browse, put a question mark after the left square
bracket; in this case you can't put a space between the keyword and the
bracket. Some examples:
#3478 [PARTS] Link to part #3478 in the PARTS file.
<PLIERS>[TOOL.LST] Link to keyword PLIERS in the file TOOL.LST.
<HAS CAR>[?SCRIPT2A] Link to keyword HAS CAR in the SCRIPT2A file,
but don't show the brackets or the file name.
- 68 -
Running Other Programs
PC-Browse can also run another program when a trigger keyword is
selected, instead of linking to the other file. In fact, it can run any
DOS command. Basically, you just put the DOS command in square brackets
instead of a file name. But there are some rules.
First, PC-Browse must be in non-resident mode. You must run PC-Browse
as a normal program, instead of a resident (TSR) program. DOS can't
handle a resident program that pops up over a second program and runs a
third program. In non-resident mode, you cannot use the Esc key to
exit; you must use Shf Esc to unload PC-Browse from memory and exit.
To load PC-Browse in non-resident mode, use the /M startup
customization option, usually by giving it on the command line that
starts PC-Browse. For example:
BR MAINMENU.BRS /M
Next, you must tell PC-Browse you want to do a DOS command, not just
link to a file. To do this, follow the "[" (or the "[?" if you want to
hide it) with a ">". For example:
Lotus [>123 PAYABLES]
*Word Processor*[?>ED]
"Regrets-Letter"[?>ED BOZOLET.TMP /e]
*Prepare New Disk*[?>c:\sys\FORMAT B:/s]
After PC-Browse runs the other program, the PC-Browse window returns.
For example, [>TYPE BETA.DOC] types BETA.DOC and returns to PC-Browse.
In this case, the file would whiz by so fast you couldn't see it. But
you can tell PC-Browse to give the message "Press any key to continue"
and wait for the user to press a key before returning. Put a /P before
the command text to do this. For example, [/P >TYPE BETA.DOC]
Even though PC-Browse is "non-resident", when you use it to run another
program you can pop up PC-Browse in that other program (you just can't
run yet another program). You can give users of these programs access
to on-line help, customer information, etc. When you include a command
to run another program, you can also give the name of a PC-Browse file
to be made available when the user pops up PC-Browse. Every program you
run can have its own PC-Browse help file. The /H switch does this. For
example:
*Payroll[? /H:FEEDEM.BR >123 PAYRLL89.WKS]
*Payables[?/H:STALLEM.BR >123 PAYBLE89.WKS]
If you use several of these options, start with the "?" that hides the
entry, then put the /H:File and /P switches, and finally the ">"
followed by the DOS command line.
- 69 -
This ability to "launch" other programs can be used to create a menu of
programs and commands to run from PC-Browse. This can be handy for
people who are not overjoyed when they see a DOS prompt. The sample
application file MENU gives you a model to start from. Here's a sample
page from this file:
<DOS>
Dir[?/p>dir /w]
Check Disk[?/p>chkdsk]
Shell to DOS[?>c:\command]
(remember: type the word 'EXIT' to return to this menu.)
F10 to Return to the Main Menu
"Dir", "Check Disk", and "Shell to DOS" are all triggers surrounded by
the delimiters code 22 (leading) and code 20 (trailing).
The first line, <DOS>, is a target keyword used to reach this page from
the main menu. The second contains the trigger keyword Dir (the
[?/p>dir /w] part is invisible). When the user selects this trigger
with the Tab key and hits Enter, the DOS directory appears, followed by
Press any key to continue. After viewing the directory and pressing a
key, the user sees this menu page again.
The third menu item runs a program called COMMAND. Since this is the
DOS command processor, when the user selects this option they get a
normal DOS prompt, and can run any DOS commands (similar to PC-Write's
F1 then F4 option). The DOS command exit leaves this shell of DOS and
returns to the PC-Browse menu again.
Additional Windows
PC-Browse can display a large amount of information. You can view
different but related references at the same time with multiple
windows. The number of windows depends on the height of the windows,
which you can define yourself (see: Customizing).
To open a new window:
* Press F2. If there is room on the screen, an exact copy of the
current window is opened below it. You continue working in the new
window while the original remains visible.
There must be room on the screen to display the full window (minus 1
line; the top line covers the bottom of the window above). By default,
there are 25 screen lines; the first window takes lines 1-13, the
second lines 13-25. If you change the height to 9 lines, three windows
fit, on lines 1-9, 9-17, and 17-25. If your screen can display more
lines (as EGA and VGA adapters do) you can tell PC-Browse to use a
longer screen. (See: Customizing.)
- 70 -
To shut the current window:
* Press Shf F2. The current window is closed and you are returned to
the window above. Pressing Shf F2 at the first window exits; you are
returned to the original program.
To reopen a window:
* Press F3. Unlike F2, which opens a new window, F3 reopens the last
one that was shut. A window can be reopened as long as another
window has not been opened with F2.
You can slide the PC-Browse windows down on the screen, to see your
application screen underneath. Then you can slide it back again. The
Shf Up and Down Arrow keys do this.
To slide the window down:
* Press Shf Down Arrow.
To slide the window up:
* Press Shf Up Arrow.
Navigating Within PC-Browse
As you explore with PC-Browse, traveling within a file or across
several files, there is always the chance that you may get "lost."
PC-Browse provides you with two navigational aids that allow you to go
off on tangents, confident that you can return to your starting point
or to any interesting "way stations" that you noted while PC-Browsing.
The Location List
The location list is the main navigational aid. Each location records
the file, your position in it, and any "found" text. Every time you
search for text or link to a keyword, PC-Browse puts both the original
and the new location on a list. If the original was already on the
list, it doesn't go on twice. Pressing Tab to select a trigger word
doesn't save the location, but does change it (since the selected text
changes). If you press Enter to follow this link, then the location is
saved. All PC-Browse windows share one location list.
You can put any location on the list yourself. If you are viewing one
file but have set a location in another, PC-Browse automatically
returns to the correct file when you return to that location. The file
name, screen position, and selected ("found") text are restored.
- 71 -
The location list is sequential; location 1 is followed by location 2,
then location 3, and so on. You can go back up the list with F4, then
either go down the same list again with F5, or start a new branch with
any search or with the set-location key, Shf F9. You can also view the
entire list and select a location from it, with Shf F4. There is only
one path, so if you start a new path at location 3, every location
beyond that (such as 4 and 5) is cleared.
There is a limit to the number of location marks you can set, and that
number varies. PC-Browse allocates 1024 bytes by default for storing
the location list for all windows. You can increase this to store a
longer location list (see: Customizing). When the list is full and you
add a new location, the oldest location is normally removed.
However, when you use Shf F9 to put a location on the list, that
location is protected. PC-Browse asks if it's okay to remove a
protected location from the list with the prompt:
| |
+Protected location found: Esc:Cancel F9:Overwrite it--------------+
A small arrow in the upper right hand window border shows the location
list status. If the arrow is pointing down, you are at the start of the
list. If it is pointing up, you are at the end of the list. A double
headed arrow means you are in the middle of the list and can go in
either direction.
To set a position on the location list:
* Press Shf F9. Any search also puts the locations before and after
the jump on the list.
To move to the prior location on the list:
* Press F4. If you're at the start of the list, PC-Browse beeps.
To move to the next location on the list:
* Press F5. If you're at the end of the list, PC-Browse beeps.
To view and select from the location list:
* Press Shf F4. The last location on the list (where F4 would take
you) is highlighted.
* Press Up or Down Arrow to select a location. F4 and F5 also move the
selection up and down. The list scrolls to show all locations.
- 72 -
* Press Grey+ or Enter to jump to the location. The old location does
not go on the list.
* Or, press Esc to cancel the location list view.
The location list indicates a protect location with a character that
looks like an upper case "P" and a lower case "t" (code 158). A
location added by a multi-file search for the find text is marked with
a fancy "f" (code 159). Both of these marks are shown just to the left
of the filename. ( directly below the "F" in File in the example
below).
+File:c:\br\hamlet-----------------Find:Thus conscience does make-----+
| a:\launch browsers |
| c:\br\address Walton |
| c:\br\hamlet of the play. |
| c:\br\hamlet <TO BE, OR NOT TO BE> |
| c:\br\hamlet Must give us pause. |
| c:\br\hamlet Thus conscience does make |
| c:\br\quarto in his mind with |
| |
+Arrows highlight entries, Enter selects (Esc:Cancel)-----------------+
Remarks
One kind of multiple-file search adds a list of all files that contain
the Find text to the location list. (See: Searching Multiple Files.)
The Bookmark
The bookmark also saves a location (like the location list), but only
you can set it (PC-Browse never sets it). The bookmark remains in
effect until you set a new one.
To set the bookmark:
* Press Ctl Home.
To return to the bookmark:
* Press Ctl End.
Pasting and Printing
You can paste selected text into your original application. You can
also print selected text to your printer or to a file. Pasting into
your application tells PC-Browse to "type" it just like it came from
the keyboard. If you're pasting text into a word processor, make sure
it is set for "insert" or "pushright" mode; otherwise, existing text
may be overwritten.
- 73 -
To paste or print with PC-Browse:
1. Press F7 to paste, or Shf F7 to print. You get the following menu:
| |
+Esc:Cancel F4:Start mark F5:Marked text F6:Filename F7:Window F8:Page+
2. Press one of the following keys:
Esc Cancels the operation and returns to the PC-Browse Main
Menu.
Up/Down The up- and down-arrow keys move the blinking cursor to
Arrow select lines for marking (this is the only time PC-Browse
uses a cursor).
F4 Starts marking lines, beginning with the cursor line.
F5 Pastes or prints the marked lines.
F6 Pastes or prints the name of the current file, with the
drive and path.
F7 Pastes or prints the contents of the current PC-Browse
window.
F8 Pastes or prints the entire current page that you are
viewing. The page may extend in either direction beyond
the window to the page break.
3. For a Paste, PC-Browse then asks when you want to paste the selected
text:
| |
+Esc:Cancel paste F9:Paste now F10:Paste when Paste-hotkey pressed----+
4. Now you have three Paste choices:
Esc Cancels the entire paste operation.
F9 Exits PC-Browse and immediately pastes the text into your
application. You must be confident that your cursor is
correctly positioned.
F10 Exits PC-Browse and returns to your application. When
you're ready to paste in the text, press Shf Ctl F7 and
the selected text will be pasted.
- 74 -
5. For a Print, PC-Browse asks if you want a form feed with the
following menu:
| |
+Esc:Cancel F9:Send form feed at end (force page out) F10:No form feed+
6. Now you have three Print choices:
Esc Cancels the entire print operation.
F9 Sends a form feed after printing. This advances
continuous feed paper to the next sheet, or ejects
sheet-fed paper, including laser printer paper.
F10 Does not send a form feed after printing. To print
several short items on one piece of paper, select F10 for
all but the last. On the last item select F9 to advance
or eject the paper.
7. For Paste or Print, if PC-Browse finds any PC-Write font characters
(codes below 32), it prompts you with:
| |
+Esc:Cancel Font char found; F9:No font chars F10:Include font chars--+
8. Now you have three choices:
Esc Cancels the entire operation.
F9 Skips over (does not include) all PC-Write font
characters. Select this if you're pasting to an
application other than PC-Write, or if you don't want the
font characters in a PC-Write document. If you're pasting
"hypertext" material with cross-references that use font
characters as delimiters, this removes them. Use this
option for printing, unless you are printing to a PC-
Write file or these characters are printer escape
sequences.
F10 Includes the font characters. This pastes or prints the
characters exactly; they are not translated as in
PC-Write. For example, if the word "text" is in PC-Write
bold font characters (code 2), it sends the code 2's and
the word "text" to the printer. It does not print the
word "text" in boldface.
Remarks
You can turn off the form feed and font character prompts, opting
instead for a setting of Always (always send form feed, always include
font characters) or Never (never send a form feed, never include font
characters). (See: Customizing.)
- 75 -
A paste, by default, simulates pressing the Enter key at the end of
each line. You can change this. For example, if the end-of-line
character is a space, pasted text will word wrap in a word processing
program. In a database program, you might want to simulate the Tab key
at the end of each line, since the Enter key might exit the data-entry
screen.
For some applications, including PC-Write versions before 3.03, a paste
incorrectly simulates the Shf Enter key at the end of a line, instead
of the Enter key. This is not serious. To correct this, you can
customize PC-Browse to always include something called the piping
delay, or to have each paste prompt you as to whether to include it. By
default, the piping delay never occurs. If you have problems pasting,
set this parameter to prompt you about including the piping delay, and
try it both ways. If you include the piping delay, some applications
may "hang" when you try to paste in text from PC-Browse.
Setting the Output File Name
You can set the name of the print output file. You can print to a disk
file, or add to the end of a file, to accumulate text. You can also set
a device name, such as LPT2.
To change the output file name:
1. Press Shf F6. The cursor jumps to the File prompt.
2. To print the file on your printer, type PRN and press Enter. PRN
is the DOS name for the printer. (PC-Browse also sends output to the
printer if there's no text in this field.)
To send the output to a file, type the name of the output file. If
the file already exists, PC-Browse asks you if you want to replace
it with the new material, append the material to the end of the
existing file, or cancel the request entirely:
| |
+File found; Esc:Cancel F9:Replace file F10:Append to end----------+
Press F9 to replace the file, or F10 to add the material to the end
of the file.
- 76 -